Advertisement
STEP 3
Attach the Leg Extension (10) to the
Leg Extension Upright (2) fixed with Bolt
(27), the Flat Washer (38), Locknut (35)
and the Cross Pin (30). Then attach the
Foam (16) to the Foam Tube (11),
Holder Grip (22) to the Handle Bar (12),
attach the Handle Bar (12) to the Leg
Extension (10) fixed with the Bolt (32),
the Flat Washer (39) and the Locknut
(36).
STEP 4
Assembly the Base Tube (42) to two
Upright Tubes (43) and (44) separately
fixed with Bolt (28), the washer (37) and
the locknut (35), and then connect the
two Upright Tubes (43) and (44)
through the Girder Frame (45) fixed with
the Washer (54), the Bolt (55), the
Washer (37) and the Locknut (35).
Attach the Crutch Tip (46) to the Upright
Tube (43) and (44) fixed with the Knob
(25), and then assembly the safety hook
(65) to the Crutch Tip (46) fastening the
Locknut (67),the Flat Washer (66) and
the Nut Cap (68). Assembly the Weight
Plate Storage Bar (52) to the upright
Tube (43) and (44) separately fixed with
the Bolt (57) and the Washer (54). And
then assembly the safety hook Cap (69)
to the Safety Hook(65), Spring Clip(41)
to the Weight Plate Storage Bar (52).
8
Advertisement
