Tool Kit; Rewind Starter Handle; Dipstick - Can-Am outlander 400 Operator's Manual

vmo2006-005-029_a
FUSES LOCATION
1. Accessories (15 A)
2. Fan (20 A)
3. Main (30 A)
4. Charging system (20 A)

22) Tool Kit

The tool kit is located in the rear stor-
age compartment. It contains tools
for basic maintenance, this Opera-
tor's Guide and the BASIC GUIDE TO
WINCHING TECHNIQUES with the
XT models.
The tools included in the tool kit are:
– pliers (1)
– screwdriver (1)
– open wrench 10/13 mm (1)
– open wrench 15/17 mm (1)
– socket wrench 10/13 mm (1)
– socket wrench 16/18 mm (1)
– tire pressure gauge (1)
– shock absorber key (1)
– fuse 30 A (1)
– fuse 20 A (1)
– fuse 15 A (1).

23) Rewind Starter Handle

The rewind starter handle is provided
as an emergency starting device.
Follow the usual starting procedure;
but use the rewind starter instead of
the electric starter.
Located on right side of vehicle. Au-
to-rewind type. To engage mecha-
nism, pull handle slowly until a resis-
tance is felt then continue to slowly
pull the handle until the compression
stroke peak (strong rotating resis-
tance) is overpassed then, pull vigor-
ously. Slowly release handle.
vmo2006-005-034_b
1. Rewind starter handle

2. Dipstick

24) Dipstick
Located on the right side of engine.
Allow to check the oil level in the en-
gine.
vmo2006-005-034_b
1. Rewind starter handle
2. Dipstick
Refer to LIQUID to check the engine
oil level correctly.
_____________________
79