Changing The Main Fuse; Changing The Fuses Of Individual Power Consumers - KTM Freeride 350 Owner's Manual

ELECTRICAL SYSTEM

Changing the main fuse

13.4
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located behind the battery.

Changing the fuses of individual power consumers

13.5
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Subsequent work
–
Install the battery.
Preliminary work
–
Switch off all power consumers and switch off the engine.
–
Raise the motorcycle with the lift stand. (
–
Fold the seat up. (
–
Remove the shock absorber.
Main work
–
Remove protection caps
B01109-10
–
Remove the faulty main fuse
Info
A defective fuse is indicated by a burned-out fuse wire
A reserve fuse
–
Install a new main fuse.
Fuse (58011109120) (
–
Check that the electrical equipment is functioning properly.
B01110-10
Tip
Insert the spare fuse so that it is available if needed.
–
Mount the protection caps.
Follow-up work
–
Install the shock absorber.
–
Lock the seat. (
–
Remove the motorcycle from the lift stand. (
Preliminary work
–
Switch off all power consumers and switch off the engine.
–
Fold the seat up. (
( p. 72)
x
p. 37)
p. 44)
( p. 43)
x
.
1
.
2
is located in the starter relay.
3
p. 98)
( p. 43)
x
p. 45)
p. 44)
.
A
p. 37)
74