Table of Contents
Advertisement
TUNING THE CHASSIS
Adjusting the rebound damping of the fork
9.13
Info
The hydraulic rebound damping determines the fork suspension behavior.
Handlebar position
9.14
0 0
–
Remove protection caps
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
B01033-10
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection covers
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
B01034-10
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
On the upper triple clamp, there are two holes at a distance of
Hole distance
The holes on the handlebar supports are placed at a distance of
Hole distance
The handlebar supports can be mounted in four different positions.
B01035-10
.
1
clockwise all the way.
2
are located at the bottom end of the fork legs.
2
.
1
clockwise all the way.
1
are located at the top end of the fork legs.
1
15 mm (0.59 in)
A
3.5 mm (0.138 in)
B
25 clicks
20 clicks
15 clicks
25 clicks
20 clicks
15 clicks
to each other.
A
from the center.
B
35
Advertisement
Table of Contents
