SERVICE WORK ON THE CHASSIS
Checking the frame
x
10.36
Checking the swingarm
x
10.37
Checking the throttle cable routing
10.38
–
Check the frame for cracking and deformation.
»
If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
401462-01
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401463-01
Preliminary work
–
Fold the seat up. (
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side behind
the handlebars and above the tank bearing.
»
If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
B01080-10
Subsequent work
–
Install the fuel tank.
–
Lock the seat. (
x
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by KTM.
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
p. 44)
(
p. 48)
x
(
p. 49)
x
p. 45)
55