Installing The Air Filter; Cleaning The Air Filter And Air Filter Housing - KTM Freeride 350 Owner's Manual

SERVICE WORK ON THE CHASSIS

Installing the air filter

x
10.23

Cleaning the air filter and air filter housing

10.24
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Do not clean the air filter with fuel or petroleum since these substances attack the foam.
–
Remove the air filter housing.
Main work
–
Take off pre-filter
–
Open air filter housing
–
Take off air filter
B01062-10
Main work
–
Mount the clean air filter onto the air filter support.
–
Apply grease to the air filter around area
Long-life grease (
B01063-10
–
Insert both parts together and close air filter housing
Info
If the air filter is not mounted correctly, dust and dirt may enter the engine
and cause damage.
B01064-10
Subsequent work
–
Install the air filter housing.
–
Lock the seat. (
x
Preliminary work
–
Fold the seat up. (
–
Remove the air filter housing.
–
Remove the air filter.
Main work
–
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Air filter cleaner (
Info
Only press the air filter to dry it, never wring it out.
–
Oil the dry air filter with a high quality filter oil.
Oil for foam air filter (
B01065-01
( p. 45)
x
.
1
and take out air filter
2
from air filter support .
4 3
.
A
p. 105)
( p. 45)
x
p. 45)
p. 44)
( p. 45)
x
( p. 45)
x
p. 105)
p. 105)
with air filter support .
4 3
.
1
46