Operation Procedure: Copying On Postcards - Konica Minolta bizhub 367 Quick Start Manual

5.4 Copy
8
Tap [Close].
9
Press the Start key to start copying of the original on envelopes.

Operation procedure: Copying on postcards

Up to 20 postcards can be loaded into the Bypass Tray.
1
Load postcards into the Bypass Tray with the print side face
down.
% Insert postcards into the tray until their edges are pressed
against the back.
NOTICE
When loading postcards into the Bypass Tray, note the following points.
When loading curled postcards, uncurl the post-
cards as shown in the figure in advance.
2
Slide the Lateral Guide to fit the size of the loaded paper.
3
Load the original.
4
Tap [Copy].
bizhub 367/287/227
5
5-29