Preparation Flow; Operation Flow - Konica Minolta bizhub 367 Quick Start Manual

3
- Offering clear images by sending data directly from a computer
Tips
- The Hard Disk is optional in some areas. To use this function, the Hard Disk and Fax Kit must be in-
stalled in this machine.
-
This function is not supported in the Mac operating system.

Preparation flow

The following describes a preparation flow to send a fax from a computer. For details, refer to the relevant
page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the telephone line and network cable. For details,
refer to page 3-51.
2
Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-52.
The network can be used with the default settings unless otherwise requested.
3
Installing the fax driver on your computer
% Install the printer driver on your computer. For details, refer to page 3-53.

Operation flow

The following describes a flow to send a fax. For details, refer to page 3-55.
1
Creating data
% Create data to be sent using application software.
2
Configuring the fax driver
% Select a fax driver, and change the setting if necessary.
3
Entering a destination to send data
% Enter a destination to send data.
3-50
Fax function 3.3
bizhub 367/287/227