2
2
Change the paper type setting.
% Select [Paper] - [#] - [Change Tray Setting] - [Paper Type] - [Envelop].
3
Specify the envelope size.
% In [Paper Size], select [Standard Size] - [Envelope/4 e 6], and specify the size of the loaded enve-
lopes.
NOTICE
When loading envelopes with flaps opened, also select the standard size that matches them. You do not
have to measure the size of the envelope with the flap opened to set the size as a custom-sized enve-
lope.
Loading label sheets
Up to 20 label sheets can be loaded into the tray.
1
Load paper in the w direction as shown in the figure with the
print side facing down, then align the Lateral Guide to the pa-
per.
% Insert label sheets into the tray until their edges are
pressed against the back.
2-36
Loading paper
2.8
bizhub 367/287/227