Operation Procedure: Copying On Postcards - Konica Minolta bizhub C368 Quick Start Manual

5.4 Copy

Operation procedure: Copying on postcards

Up to 20 postcards can be loaded into the Bypass Tray.
1
Load postcards into the Bypass Tray with the print side face
down.
% Insert postcards into the tray until their edges are pressed
against the back.
NOTICE
When loading postcards into the Bypass Tray, note the following points.
When loading curled postcards, uncurl the post-
cards as shown in the figure in advance.
2
Slide the Lateral Guide to fit the size of the loaded paper.
The screen for selecting the paper type and paper size appears.
NOTICE
When using the Bypass Tray, note the following points.
Do not put spare postcards in the Bypass Tray. Doing so causes
a size detection error.
bizhub C368/C308/C258
5
5-33