6
When a Developing Unit needs to be replaced
When the replacement time has come for a Developing Unit, the following message appears. If the message
appears, contact your service representative.
Tips
-
By the factory default status, this message is displayed only in some area.
-
The settings by the service representative are required to display a message about Developing Unit.
For details, contact your service representative.
When a Waste Toner Box is full
When the Waste Toner Box is full, the following message appears (at replacement by user). Tap [Start Guid-
ance], then follow the displayed guidance to take an action.
6-8
When a message appears to replace consumables or carry out cleaning
6.4
bizhub 367/287/227