List Of Other Optional Components - Konica Minolta bizhub 367 Quick Start Manual

2
No. Name
1 Main unit
2 Original Cover OC-514
3 Reverse Automatic Doc-
ument Feeder DF-628
4 Fax Kit FK-513
5 Authentication Unit
AU-102 (Biometric Type)
6 Authentication Unit
AU-201S (IC Card Type)
7 Working Table WT-506
8 Keypad KP-101
9 Keyboard Holder KH-102
10 Desk DK-513
11 Paper Feed Cabinet
PC-413
12 Paper Feed Cabinet
PC-213
13 Paper Feed Cabinet
PC-113
14 Finisher FS-534
15 Saddle Stitcher SD-511
16 Punch Kit PK-520
17 Relay Unit RU-514
18 Finisher FS-533
19 Mount Kit MK-602
20 Punch Kit PK-519
21 Job Separator JS-506

List of other optional components

The following options are built into this machine and are not shown in the figure.
No. Name
1 Stamp Unit SP-501
2 Spare TX Marker Stamp
2
3 Local Interface Kit
EK-608
2-8
Description
Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
Used to fix the loaded originals.
Automatically feeds and scans originals by page.
Required to use the fax function.
Performs user authentication by scanning vein patterns in the fin-
ger.
The Working Table WT-506 and Local Interface Kit are required
to install the Authentication Unit AU-102.
Performs user authentication by scanning information recorded on
the IC card.
The Working Table WT-506 and Local Interface Kit are required
to install the Authentication Unit AU-201S.
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit is installed.
It is equipped on the side of the Control Panel. Allows you to enter
numbers by using the Hardware Keypad.
Install this holder to use an external keyboard.
Used to place this machine on the floor.
Can load up to 2500 sheets of 8-1/2 e 11 (A4) size paper.
Can load up to 500 sheets respectively into the top and bottom
trays.
Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
Sorts, groups, or staples output sheets as required. To install the
Finisher FS-534, the Relay Unit RU-514 is required. Also, Desk
DK-513, Paper Feed Cabinet PC-413, Paper Feed Cabinet PC-
113, or Paper Feed Cabinet PC-213 must be installed on this ma-
chine.
Used to add the center staple function to the Finisher FS-534.
Used to add the punch function to the Finisher FS-534.
Required to install the Finisher FS-534.
Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
The Mount Kit MK-602 is required to install the Finisher FS-533.
Required to install the Finisher FS-533.
Used to add the punch function to the Finisher FS-533.
Used to separate output sheets into two trays in the body of the ma-
chine.
Description
Stamps a scanned original when sending a fax.
A replacement stamp for the Stamp Unit SP-501.
Install this unit when using the voice guidance function, Authenti-
cation Unit AU-102, Authentication Unit AU-201S, or Upgrade
Kit UK-212.
About this machine 2.3
bizhub 367/287/227