Xerox WorkCentre 6027 User Manual page 173

3. Remove the paper from the paper tray.
Keep the paper wrapped and away from humidity and dirt.
4. Lift and carry the printer as shown in the illustration.
Note: To find the weight for your printer configuration, see
CAUTION:
Failure to repackage the printer properly for shipment can result in damage not covered
®
by the Xerox Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by
improper moving.
When moving the printer, do not tilt it more than 10 degrees to the front, back, left, or right. Tilting the
printer more than 10 degrees can cause toner spillage.
After moving the printer:
1. Reinstall any parts you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn on the printer.
Physical Specifications
® ®
Xerox WorkCentre 6027 Multifunction Printer
Maintenance
on page 199.
®
Warranty,
173
User Guide