Running The Engine In - KTM 1190 RC8 R Owner's Manual

7 PREPARING FOR USE
–
Make sure that the pre-delivery inspection work has been carried out exclusively by an authorized KTM-RC8 workshop.
You receive a delivery certificate and the service record at vehicle handover.
–
Before your first trip, read the entire operating instructions carefully.
–
Get to know the controls.
–
Adjust the basic position of clutch lever. (
–
Adjust the basic position of hand brake lever. (
–
Adjust the foot brake lever. (
–
Adjust the shift lever. (
–
Get used to handling the vehicle on suitable terrain before making a longer trip. Try also to ride as slowly as possible to get a better
feeling for the motorcycle.
–
Hold the handlebars firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in. ( p. 113)
7.2

Running the engine in

–
Do not exceed the specified engine speed and load during the running-in period.
Guideline
Maximum engine speed
During the first: 1,000 km (621.4 mi)
After the first: 1,000 km (621.4 mi)
–
Avoid full-throttle operation!
p. 177)
p. 179)
p. 152)
p. 148)
7,500 rpm
10,500 rpm
113