10
TUNING THE CHASSIS
10.24
Rear frame position
–
Position the distance sleeve.
–
Mount and tighten screw
Guideline
Remaining frame bolts
–
Tighten screw
Guideline
Screw, handlebar stub
600986-11
–
Repeat the adjustments on the other handlebar stub.
–
Carefully move the handlebar to and fro over the entire steering range.
»
If a component restricts the freedom of movement of the steering or comes into
contact with the trim:
–
The frame rear height can be set to two different positions, enabling ergonomic adjustment
of the seat height.
Seat height
A
Seat height
B
400439-10
.
2
.
1
Establish freedom of movement and reposition the component.
805 mm (31.69 in)
(standard)
825 mm (32.48 in)
M5
5 Nm (3.7 lbf ft)
M8
20 Nm
(14.8 lbf ft)
159