KTM 1190 RC8 R Owner's Manual page 220

14 ELECTRICAL SYSTEM
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
EFI warning lamp
The immobilizer indicator lamp
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the black programming key to the position ON
100749-01
EFI warning lamp
The immobilizer indicator lamp
on again.
–
Switch off the ignition by turning the black programming key to the position OFF
–
Remove the black ignition key.
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
EFI warning lamp
The immobilizer indicator lamp
according to the number of functioning black ignition keys including the orange
programming key. In this case, twice.
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
The lost black ignition key is deactivated.
The existing black ignition key is reactivated.
(MIL) lights up, switches off, and then starts to flash.
lights up.
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and switches
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and flashes
218
.
.
.
.
.
.