Video Send_Commands; Ci<Input>O<Output; Cl<Sl>I<Input>O<Output; Input - AMX Enova DVX-3150HD-SP Instruction Manual

Video SEND_COMMANDs

The following table lists the video SEND_COMMANDs available for the DVX:
Video SEND_COMMANDs
CI<input>O<output>
CL<sl>I<input>O<output>

?INPUT

?OSD

OSD
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Switches both the audio and video input port to the output port.
Syntax:
SEND_COMMAND <DEV>, "'CI<input>O<output>'"
Variables:
input = The source input port number.
output = The output port number to switch to.
Examples:
SEND_COMMAND SWITCHER,"'CI2O1'"
Switch (audio/video) input port #2 to output #1.
SEND_COMMAND SWITCHER,"'CI4O2'"
Switch video input port #4 to video output #2. Also switches audio input port #4 to audio output port
#2.
SEND_COMMAND SWITCHER,"'CI3O1,2'"
Switches video input port #3 to output video ports #1 and #2. Switches audio input port #3 to audio
output port #1 and #2.
Switches the audio or video (or both) inputs to the output port.
Syntax:
SEND_COMMAND <DEV>, "'CL<sl>I<input>O<output>'"
Variables:
sl = AUDIO or VIDEO or ALL. ALL = both AUDIO and VIDEO.
input = The source input port number.
output = The output port number to switch to.
Examples:
SEND_COMMAND SWITCHER,"'CLALLI2O1'"
Switch audio and video inputs (port #2) to output #1.
SEND_COMMAND SWITCHER,"'CLVIDEOI3O1,2'"
Switch video input (port #3) to video output ports #1 and #2.
SEND_COMMAND SWITCHER,"'CLAUDIOI4O1'"
Switch audio input (port #4) to audio output port #1.
SEND_COMMAND SWITCHER,"'CLALLI1O1,2'"
Switches video input (port #1) to video output ports #1 and #2. Switches audio input (port #1) to
audio output port #1.
Requests for the input connected to an output.
Normally, if the output port is not connected to any input port then the reply will indicate this with an
input port number of ZERO (0). For the DVX products, at this time, the output parameter is ignored and
assumed to be 1.
Syntax:
SEND_COMMAND <DEV>, "'?INPUT-<sl>,<output>'"
Variables:
sl = AUDIO or VIDEO.
output = The output port number.
Example:
SEND_COMMAND SWITCHER,"'?INPUT-AUDIO,1'"
Think of it as asking: Which audio input port is connected to output port #1?
Returns a COMMAND string of the form:
SWITCH-L<AUDIO|VIDEO>I<input>O<output>
See the ?VIDOUT_OSD on page 104.
See the VIDOUT_OSD on page 104.
Programming
Continued 
96