Lisy Of Symbols; Red Symbols; Yellow And Orange Symbols; Green And Blue Symbols - KTM 1290 SUPERDUKE R Owner's Manual

Table of Contents

Advertisement

29

LISY OF SYMBOLS

29.1

Red symbols

Red symbols indicate an error condition that requires immediate intervention.
The immobilizer indicator lamp lights up or flashes red – Status or error message for immobilizer/alarm system.
The oil pressure warning lamp lights up red – Engine oil pressure is too low.
29.2

Yellow and orange symbols

Yellow and orange symbols indicate an error condition that requires prompt intervention. Active driving aids are also represented by yellow
or orange symbols.
The general warning lamp lights up yellow – An operating safety (warning) message was detected. This is also
shown on the matrix display.
The engine warning lamp lights up/flashes yellow – The engine control unit has detected a fault.
The ABS lamp lights up/flashes yellow – ABS is not active. The ABS lamp also lights up when an error is detected.
The TC lamp lights up/flashes yellow – Traction control is not enabled or is currently intervening. The TC lamp also
lights up when an error is detected.
29.3

Green and blue symbols

Green and blue symbols reflect information.
The high beam indicator lamp lights up blue – The high beam is switched on.
204

Advertisement

Table of Contents
loading

Table of Contents