8
ERGONOMICS
8.3
Setting the basic setting of the clutch lever
Guideline
Screw, instrument support
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamp. Mount and evenly tighten screws
Guideline
Screw, handlebar clamp
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw
.
Info
Turn the adjusting screw clockwise to increase the distance between the clutch
lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
L01414-10
Push the hand brake lever forward and turn the adjusting wheel.
Do not make any adjustments while riding.
M10
40 Nm
(29.5 lbf ft)
M8
65
Loctite
®
243™
.
20 Nm
(14.8 lbf ft)