Table of Contents
Advertisement
13
SERVICE WORK ON THE CHASSIS
Main work
–
Loosen screw
–
Set the chain tension by turning the hub housing.
Hook wrench (61329085000)
Handle for ring wrench (60012060000)
Info
Turn clockwise to increase the chain tension; turn counterclockwise to reduce
the chain tension.
L01452-10
–
Check the chain tension. (
The chain tension is equal to the specified value.
Info
Chain wear is not always even, so you should check the setting at different chain
positions.
–
Tighten screw
Guideline
Screw, eccentric
Finishing work
–
Remove the rear of the motorcycle from the lifting gear. (
.
p. 107)
.
M16
70 Nm
(51.6 lbf ft)
p. 97)
109
Advertisement
Table of Contents
