15
WHEELS, TIRES
–
Position the brake calipers and check that the brake linings are seated correctly.
–
Mount screws
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
The brake calipers straighten.
–
Tighten screws
Guideline
309487-11
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Take the motorcycle from the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear. (
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, axle clamp
309493-10
on both brake calipers but do not tighten yet.
on both brake calipers.
M10
.
45 Nm
Loctite
(33.2 lbf ft)
p. 99)
p. 97)
M8
15 Nm
(11.1 lbf ft)
128
®
243™