Table of Contents
Advertisement
8
ERGONOMICS
8.1
Handlebar position
8.2
Adjusting the handlebar position
Warning
Danger of accidents Handlebar breakage.
–
If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace handlebar.
On the upper triple clamp there are two holes a distance of
Hole distance
The handlebar can be mounted in two different positions. In this way, the handlebar can be
mounted in the most comfortable position for the rider.
Info
KTM recommends the front handlebar position when using the vehicle on a race
track.
402000-11
–
Remove screws
screws
Info
Protect the components against damage by covering them.
Do not kink the cables and lines.
–
Remove screws
–
Move the instrument support into the desired position
L01476-10
screws
15 mm (0.59 in)
. Take off handlebar clamp
are accessible.
. Take off instrument support
.
apart.
. Position the handlebar so that
.
or
. Mount and tighten
64
Advertisement
Table of Contents
