Installing The Glass Fiber Yarn Filling Of The Main Silencer; Changing Glass Fiber Yarn Filling Of Main Silencer; Dismounting The Air Filter Box Lid; Installing The Air Filter Box Lid - KTM 450 SMR Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Installing the glass fiber yarn filling of the main silencer

9.94

Changing glass fiber yarn filling of main silencer

9.95
–
Remove glass fiber yarn filling of main silencer.
–
Install the glass fiber yarn filling of the main silencer.

Dismounting the air filter box lid

9.96

Installing the air filter box lid

9.97

Removing the air filter

x
9.98
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
–
Attach the glass fiber yarn filling to inner tube
tube .

–
Mount connecting cap
–
Attach the glass fiber yarn filling to insert
Mount and tighten the screws.
–
Mount locking cap
–
Install the main silencer. (
500226-11
x
( p. 57)
x
(
x
–
Pull off the air filter box lid in area
500222-10
–
Insert the air filter box lid into the rear area
500222-11
–
Dismount the air filter box lid. (
–
Undo the hose clip
–
Remove the air filter.
500223-10
x
. Mount and tighten the screws.


. Mount and tighten the screws.

p. 57)
p. 58)
to the side and remove to the front.

p. 58)
.

. Mount the inner tube in outer

. Mount the insert into outer tube
and clip it into the front area

58
.

.
