Checking The Fluid Level Of Hydraulic Clutch - KTM 450 SMR Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Checking the fluid level of hydraulic clutch

9.104
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
–
Remove screw
Info
Do not remove all screws at once!
–
Remove or add the desired washer. Mount and tighten screw
spring retainer and the clutch spring.
Guideline
Screw, clutch spring
Info
No more than one washer may be used!
–
Remove screw
–
Remove or add the desired washer. Mount and tighten screw
spring retainer and the clutch spring.
Guideline
Screw, clutch spring
500279-10
Info
The number and thickness of washers must be the same on all screws!
–
Remove screw
–
Remove or add the desired washer. Mount and tighten screw
spring retainer and the clutch spring.
Guideline
Screw, clutch spring
Info
The number and thickness of washers must be the same on all screws!
–
Position the outer clutch cover. Mount and tighten screws
Guideline
Screw, clutch cover
500278-10
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level under top level of container.
» If the level of the fluid does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
400245-10
Hydraulic fluid (15) (
–
Position the cover with the membrane. Mount and tighten the screws.
together with the spring retainer and the clutch spring.

M5
together with the spring retainer and the clutch spring.

M5
together with the spring retainer and the clutch spring.

M5
M6
.

with membrane .
 
4 mm (0.16 in)
p. 82)
61
together with the

6.5 Nm
(4.79 lbf ft)
together with the

6.5 Nm
(4.79 lbf ft)
together with the

6.5 Nm
(4.79 lbf ft)
.

10 Nm (7.4 lbf ft)