Installing The Front Wheel - KTM 450 SMR Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Installing the front wheel

9.68
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of
the fork.
Info
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
500210-10
–
Remove spacing sleeves
500211-10
x
–
Clean and grease shaft seal rings
Long-life grease (
–
Insert the spacing sleeves.
500211-11
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
500212-10
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
500208-10
.

and bearing surface

p. 84)
.

M24x1.5
M10x1.25 40 Nm
(29.5 lbf ft)
47
of the spacing sleeves.

40 Nm
(29.5 lbf ft)
with washers .
 
Loctite ® 243™