MAINTENANCE WORK ON CHASSIS AND ENGINE
Checking engine oil level
9.109
Info
The engine oil level can be checked on a cold or hot engine.
Changing engine oil and oil filter, cleaning oil screen
9.110
–
Drain the engine oil.
(
x
–
Remove the oil filter.
x
–
Install the oil filter.
x
(
–
Fill up with engine oil.
x
Draining the engine oil
x
9.111
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
Info
Drain the engine oil only when the engine is warm.
–
Guide the hose coming down behind the engine into a suitable container.
–
Undo the screw
the float chamber.
–
Tighten screw
500273-11
–
Stand the motorcycle upright on a horizontal surface.
Condition
The engine is at operating temperature.
–
Check the engine oil level.
The engine oil reaches the top of the viewer
400212-10
»
Condition
Engine is cold.
–
Check the engine oil level.
The engine oil reaches the bottom of the viewer
»
p. 64)
(
p. 65)
p. 66)
(
p. 66)
–
Stand the motorcycle on its side stand on a horizontal surface.
Info
Water in the float chamber results in malfunctioning.
(turn it counterclockwise) a few turns and drain the fuel from
.
Info
After switching off the engine, wait one minute before checking the
level.
When the engine oil does not reach the top of the viewer:
–
Top up the engine oil. (
When the engine oil does not reach the bottom of the viewer:
–
Top up the engine oil. (
x
.
p. 66)
.
p. 66)
64