05/EXHAUST
Changing the glass fiber yarn filling of the main silencer
7.5
–
Remove the glass fiber yarn filling of the main silencer. (
–
Install the glass fiber yarn filling of the main silencer. (
Removing the glass fiber yarn filling of the main silencer
7.6
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Installing the glass fiber yarn filling of the main silencer
7.7
–
Mount and tighten screw
Guideline
Remaining screws, chassis
700442-10
p. 23)
–
Remove the main silencer. (
–
Remove screws
–
Pull the glass fiber yarn filling
–
Clean the parts that are to be reinstalled.
700443-01
–
Slide the glass fiber yarn filling
–
Slide the outer tube
–
Insert the locking cap
wheels and tighten.
Guideline
Remaining screws, chassis
–
Install the main silencer. (
700443-10
.
p. 23)
p. 22)
of locking cap
. Remove locking cap and outer tube
from the inner tube.
over the inner tube.
over the glass fiber yarn filling.
into the outer tube. Mount the screws
p. 22)
M6
10 Nm (7.4 lbf ft)
with toothed
M6
10 Nm (7.4 lbf ft)
23
.