Cleaning The Oil Screen; Removing The Oil Filter - KTM 450 SMR Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Cleaning the oil screen

x
9.112
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.

Removing the oil filter

x
9.113
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Completely drain the engine oil.
–
Thoroughly clean the oil drain plug with the magnet.
–
Clean the sealing area on the engine.
–
Mount and tighten oil drain plug
Guideline
Oil drain plug with magnet
800011-10
–
Clean the oil screen.
–
Place a suitable container under the engine.
–
Loosen plug
–
Remove plug
–
Drain the remaining engine oil.
–
Thoroughly clean parts and sealing area.
–
Mount and tighten plug
Guideline
Plug, oil screen
800011-11
–
Place a suitable container under the engine.
–
Remove screws
400262-10
with the seal ring.

with the seal ring.

( p. 65)
x
by striking it lightly with a hammer a few times.

with oil screen and the O-rings.
 
with oil screen

. Remove oil filter cover with O-ring.

M12x1.5 20 Nm
(14.8 lbf ft)
and the O-rings.

M32x1.5 30 Nm
(22.1 lbf ft)
65