Installing The Switch On A Desktop Or Table - Allied Telesis FS750 SERIES Installation Manual

Installing the Switch on a Desktop or Table

You may install the switches on a desktop or table, or in a standard
19-inch equipment rack. To install the switch in a rack, see "Installing the
Switch in an Equipment Rack" on page 34.
To place the switch on a desktop or table, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Turn the switch over and place it on a table.
3. Attach the four rubber feet to the bottom of the switch as shown in
Figure 5.
Figure 5. Attaching the Rubber Feet
4. Place the switch on a flat, secure surface (such as a desk or table)
leaving ample space around the unit for ventilation.
5. Go to "Installing SFP Transceivers" on page 38 or "Cabling the Switch"
on page 40.
FS750 Series Fast Ethernet Switches Installation Guide
33