Allied Telesis FS750 SERIES Installation Manual page 37

5. Install the four plastic anchors included with the switch into the wall, at
the locations marked in the previous step. The anchors require 0.635
mm (0.25 in.) holes.
6. While another person holds the switch at the wall location, secure it to
the wall using the four wall mounting screws. See Figure 10 on page
37.
Figure 10. Securing the Switch to the Wall
7. Go to "Installing SFP Transceivers" on page 38 or "Cabling the Switch"
on page 40.
FS750 Series Fast Ethernet Switches Installation Guide
37