Cable Specifications - Allied Telesis FS750 SERIES Installation Manual

Cable Specifications

Table 9 contains the cable specifications for the twisted-pair ports.
Table 9. Twisted-Pair Cabling and Distances
Speed
10 Mbps Standard TIA/EIA 568-B-compliant
Category 3 or better shielded or
unshielded cabling with 100 ohm
impedance and a frequency of 16
MHz.
100 Mbps Standard TIA/EIA 568-A-compliant
Category 5 or TIA/EIA
568-B-compliant Enhanced Category
5 (Cat 5e) shielded or unshielded
cabling with 100 ohm impedance and
a frequency of 100 MHz.
1000 Mbps Standard TIA/EIA 568-A-compliant
Category 5 or TIA/EIA
568-B-compliant Enhanced Category
5 (Cat 5e) shielded or unshielded
cabling with 100 ohm impedance and
a frequency of 100 MHz.
Note
The twisted-pair ports on the switch feature auto-MDI when
operating at 10, 100, or 1000 Mbps. A port is configured as MDI or
MDI-X when it is connected to an end node. Consequently, you can
use a straight-through twisted-pair cable when connecting any type
of network device to a port on the switch.
FS750 Series Fast Ethernet Switches Installation Guide
Type of Cable
Maximum
Operating
Distance
100 m (328 ft)
100 m (328 ft)
100 m (328 ft)
31