Allied Telesis FS750 SERIES Installation Manual page 39

4. Verify that the handle on the transceiver is in the upright position, as
shown in Figure 12. This secures the transceiver and prevents it from
being dislodged from the slot.
SFP Transceiver
Handle
Figure 12.
5. Repeat steps 2 through 5 to install an additional SFP transceiver.
Caution
When you remove an SFP module from this product, the case
temperature of the SFP may exceed 70 C (158 F). Exercise caution
when handling with unprotected hands.
Note
Unnecessary removal and insertion of an SFP can lead to premature
failure.
For information on the cable specifications of the SFP, consult the
documentation shipped with the SFP.
6. Go to "Cabling the Switch" on page 40.
FS750 Series Fast Ethernet Switches Installation Guide
SFP Handle in Upright Position

E43
39