Allied Telesis FS750 SERIES Installation Manual page 28

Chapter 2: Installation
28
Note
If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than
the room ambient temperature. Therefore, consideration should be
given to installing the equipment in an environment compatible with
the manufacturer's maximum rated ambient temperature (Tmra).
E35

Caution
Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not
compromised. E36

Warning
Reliable earthing of rack-mounted equipment should be maintained.
Particular attention should be given to supply connections other than
direct connections to the branch circuits (e.g., use of power strips).
E37

Warning
When you remove an SFP module from this product, the case
temperature of the SFP may exceed 70
caution when handling with unprotected hands.
Warning
Operating Temperature. This product is designed for a maximum
ambient temperature of 50 degrees C.
Warning
In a domestic environment this product may cause radio
interference in which case the user may be required to take
adequate measures.

Warning
An SFP transceiver can be damaged by static electricity. Be sure to
observe all standard electrostatic discharge (ESD) precautions,
such as wearing an antistatic wrist strap, to avoid damaging the
transceiver. E86

o
C (158
E57

E84
o
F). Exercise
E43
