Changing The Send Settings - Sharp MX-M260 Operation Manual

NETWORK SCANNER FUNCTION

CHANGING THE SEND SETTINGS

The file name of the scanned image can be changed.
When performing Scan to E-mail, the subject and sender can also be changed.
If the send settings are not changed, these items are entered automatically using the information stored in the Web page.
1
Touch the [SEND SETTINGS] key.
ADDRESS
ADDRESS REVIEW
ADDRESS ENTRY
SEND SETTINGS
2
Touch the [SUBJECT], [FILE NAME],
or [SENDER] key to change the
corresponding entry.
SEND SETTINGS
SUBJECT
FILE NAME
SENDER
3
If the [SUBJECT] key or [FILE NAME]
key is touched, a keyboard will
appear. Enter the desired text and
then touch the [OK] key.
Up to 64 characters can be entered.
SUBJECT
XXXXX
• A maximum of only 54 characters can be
Note
displayed in the send settings screen.
• When entering a file name, there is no
need to enter a file extension.
The file extension is added automatically
based on the selected file format.
• The following symbols cannot be used
when entering a file name or folder name.
\
<
Depending on the environment of use of
the OS, it may not be possible to use
spaces and the symbols indicated below.
For example, hyperlinks will not operate
correctly or nonsense characters may appear.
$ % ' ( ) + - . = @ [ ] ^ ` { } _
82
Downloaded From ManualsPrinter.com Manuals
BOOK
If the [Enable User
Authentication] or
(USE DEF [Disable selection of
sender from Sender List]
(USE DEF
checkbox is selected in
"Advanced Setup" in
(USE DEF
"Network Scanning" in the
Web page, the [SENDER]
key will be greyed out and
cannot be selected (p.58).
CANCEL
ABC
12#$%
SPACE AB/ab ÃÄÂ/ãäâ
? / " ;
> ! * |
4
If [SENDER] is touched, a sender
selection screen will appear. Touch
the desired one-touch key and then
touch the [OK] key.
The [GLOBAL ADDRESS SEARCH] key is used
to select a user stored in a global address book
as a sender. (p.75)
The [ADDRESS ENTRY] key is used to directly
enter an e-mail address.
TEST1
TEST3
TEST5
FREQUENT USE
Note
OK
5
Touch the [OK] key in the send
abc
settings screen.
: ,
& #
1/2
TEST2
TEST4
ADDRESS SEARCH
TEST6
ADDRESS ENTRY
ABCD EFGHI JKLMN OPQRST UVWXYZ
• The senders that have been stored in
"Sender" in the Web page appear in the
sender select screen. If the desired
sender does not appear, you must first
store it as a Scan to E-mail destination in
"Sender" in the Web page. (p.67)
• When a checkmark appears in the
[Disable selection of sender.] checkbox in
the Web page, the [SENDER] key in the
"SEND SETTING" screen is greyed out to
prevent selection of senders and entry of
e-mail addresses.
• If an LDAP server is not configured in the
Web page, the [GLOBAL ADDRESS
SEARCH] key will be greyed out and
searching will not be possible.
You will return to the
OK
initial screen.
OK
GLOBAL
ABC GROUP