Changing The Send Settings; Settings Screen - Sharp AR-M257 Key Operator's Manual

HOW TO USE THE NETWORK SCANNER FUNCTION

CHANGING THE SEND SETTINGS

The file name of the scanned image can be changed.
When performing Scan to E-mail, the subject and sender can also be changed.
If the send settings are not changed, these items are entered automatically using the information stored in the Web
page.
1
Touch the [SEND SETTINGS] key.
ADDRESS
BOOK
ADDRESS REVIEW
ADDRESS ENTRY
SEND SETTINGS
2
Touch the [SUBJECT], [FILE NAME],
or [SENDER] key to change the
corresponding entry.
SEND SETTINGS
(USE DEF
SUBJECT
(USE DEF
FILE NAME
(USE DEF
SENDER
3
If the [SUBJECT] key or [FILE NAME]
key is touched, a keyboard will
appear. Enter the desired text and
then touch the [OK] key.
Up to 64 characters can be entered.
SUBJECT
XXXXX
SPACE
• A maximum of only 54 characters can be
Note
displayed in the send settings screen.
• When entering a file name, there is no
need to enter a file extension.
The file extension is added automatically
based on the selected file format.
30
If the [Enable User
Authentication] or
[Disable selection of
sender from Sender List]
checkbox is selected in
"Advanced Setup" in
"Network Scanning" in
the Web page, the
[SENDER] key will be
grayed out and cannot be
selected (p.6).
CANCEL OK
ABC abc
12#$%
AB/ab ÃÄÂ/ãäâ
4
If [SENDER] is touched, a sender
selection screen will appear. Touch
the desired one-touch key and then
touch the [OK] key.
The [GLOBAL ADDRESS SEARCH] key is used
to select a user stored in a global address book
as a sender. (p.23)
The [ADDRESS ENTRY] key is used to directly
enter an e-mail address.
• The senders that have been stored in
Note
"Sender" in the Web page appear in the
sender select screen. If the desired
sender does not appear, you must first
store it as a Scan to E-mail destination in
"Sender" in the Web page. (p.15)
• When a checkmark appears in the
[Disable selection of sender.] checkbox in
the Web page, the [SENDER] key in the
"SEND SETTING" screen is grayed out to
prevent selection of senders and entry of
e-mail addresses.
• If an LDAP server is not configured in the
Web page, the [GLOBAL ADDRESS
SEARCH] key will be grayed out and
searching will not be possible.
5
Touch the [OK] key in the send

settings screen.

OK
You will return to the
initial screen.