Misfeed In The Bypass Tray; Misfeed In The Machine - Sharp MX-M260 Operation Manual

MISFEED IN THE BYPASS TRAY

1
Carefully pull the misfed paper out.

MISFEED IN THE MACHINE

Determine the location of the misfeed and remove it appropriately as indicated below.
If paper is misfed here, go to "A.
Misfeed in the paper feed area"
(below).
A. Misfeed in the paper feed area
1
Open the bypass tray and the side
cover.
2
Press gently on both sides of the front
cover and pull it open.
Downloaded From ManualsPrinter.com Manuals
TROUBLESHOOTING AND MAINTENANCE
2
Open and close the side cover.
If paper is misfed, go to "B:
Misfeed in the fusing area"
(p.130).
3
Carefully remove the misfed paper.
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
Roller rotating knob
The fusing unit is hot. Do not touch
Warning
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Do not touch the photoconductive drum
Caution
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
Make sure that the
misfeed message is
cleared.
The message can also
be cleared by opening
and closing the front
cover.
If the message is not
cleared, see "A. Misfeed
in the paper feed area".
Be careful not to tear the
misfed paper during
removal.
129
5