Reduction/Enlargement/Zoom; Automatic Ratio Selection - Sharp MX-M260 Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

There are three ways to enlarge and reduce copies:
● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)
● Specifying a ratio with the reduce key, enlarge key, or zoom key ..................MANUAL RATIO SELECTION (p.32)
● Separately selecting vertical and horizontal ratios ........................................................... XY ZOOM copying (p.33)
Ratios that can be selected vary depending on the following conditions:
Document glass
RSPF

AUTOMATIC RATIO SELECTION

The ratio is automatically selected based on the original size and paper size.
1
Place the original(s). (p.23, p.24)
The original size appears in the touch panel.
• If the original size does not appear in the
Note
touch panel, specify the original size
manually. (p.48)
• Automatic ratio selection is not possible if
the original or paper is a non-standard
size.
2
Touch the [PAPER SELECT] key and
then select the desired paper size.
A4
B4
If paper of the desired size is not loaded in
Note
any of the trays, load paper of the required
size in a paper tray or in the bypass tray.
(p.19)
3
Touch the [AUTO IMAGE] key.
A4
A3
Downloaded From ManualsPrinter.com Manuals
Original position
The selected key is
highlighted and the paper
PLAIN
selection screen closes.
RECYCLED
A suitable ratio is
selected based on the
original size and selected
paper size. (The ratio
appears in the touch
panel.)
Selectable ratios
25 to 400%
50 to 200%
• When automatic ratio selection is
Note
selected, the [AUTO IMAGE] key is
highlighted in the main screen.
• If the original and paper are in different
orientations, the image is automatically
rotated to match the paper orientation (for
paper sizes A4 (8-1/2" x 11") or less).
• Rotation of the image can be disabled in the
administrator settings. (See "6. SYSTEM
SETTINGS (ADMINISTRATOR)".)
• If "IMAGE IS LARGER THAN THE COPY
PAPER." appears in the touch panel, part
of the image will be cut off in the copy.
4
Select the number of copies and any
other desired settings, and then press
the [START] key (
LOGOUT
UT
To cancel automatic ratio selection, touch
Note
the [AUTO IMAGE] key. Automatic ratio
selection also turns off automatically when
the enlargement key, the reduction key, or a
[ZOOM] key
the ratio to be selected.
).
( / )
is touched to allow
31
2