Scanning And Transmitting A Two-Sided Original (When An Rspf Is Installed) - Sharp MX-M260 Operation Manual

NETWORK SCANNER FUNCTION
SCANNING AND TRANSMITTING A TWO-SIDED
ORIGINAL (when an RSPF is installed)
Follow these steps to automatically scan a two-sided original.
1
Make sure the machine is in scanner
mode and then load the document in
the RSPF. (p.72)
2
Touch the [ORIGINAL] key.
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
AUTO A4
ORIGINAL
3
Touch the [2-SIDED BOOKLET] key or
the [2-SIDED TABLET] key as
appropriate for the original you
loaded.
ORIGINAL SIZE
AUTO
2-SIDED 2-SIDED
BOOKLET TABLET
If the correct original size does not appear in
Note
the screen of step 2, touch the [MANUAL]
key and specify the correct original size
(p.78).
• Booklets and tablets
Note
Two-sided originals that are bound at the side are booklets, and two-sided
originals that are bound at the top are tablets.
• Two-sided scanning mode turns off after transmission is finished. Two-sided
scanning mode can also be cancelled by pressing the [CLEAR ALL] key
( ).
76
Downloaded From ManualsPrinter.com Manuals
If you wish to rotate the
original 90° when
MANUAL
creating an image file,
touch the [ROTATE THE
IMAGE 90 DEGREES]
checkbox (a checkmark
ROTATE THE
should appear in the
box).
4
Touch the [OK] key.
INAL SIZE
OK
MANUAL
2-SIDED JOB
TABLET
BUILD
ROTATE THE IMAGE 90 DEGREES
5
Continue from step 4 of "BASIC
TRANSMISSION METHOD" (p.72 to 73).
You will return to the
initial screen.
Booklet Tablet