GENERAL MALFUNCTION
If the equipment malfunctions, this may be
because an electrostatic discharge or AC line
interference has corrupted the information in the
equipment memory circuits. Therefore:
-
disconnect the plug from the AC line supply
-
after waiting at least three minutes, reconnect
the plug to the AC line supply
-
re-attempt to operate the equipment
Memory backup
• In case a power outage occurs or the power
cord is accidentally unplugged, the SR7400
is equipped with a backup function to
prevent memory data such as the preset
memory from being erased.
HOW TO RESET THE UNIT
AV SURROUND RECEIVER SR7400
SELECTOR
VOLUME
CLEAR
MEMORY
TUNING
F/P
MODE
DOWN
SPEAKERS A/B
MULTI
MULTI SPEAKER
7.1CH INPUT
AUX2
SELECT
ENTER
MUTE
STANDBY
TV
DVD
VCR1
DSS/VCR2
AUX1
CD-R
TAPE
CD
TUNER
AUX1 INPUT
POWER ON/STANDBY
PHONES
DIGITAL
S-VIDEO
VIDEO
Should the operation or display seem to be abnormal,
reset the unit with the following procedure.
The SR7400 is turned on, press and hold the
SELECT and S-DIRECT buttons simultaneously
for 3 seconds or more.
Remember that the procedure will reset the
settings of the function selector, Surround mode,
delay time, TUNER PRESET etc., to their initial
settings.
UP
S-DIRECT
S-DIRECT
L
AUDIO
R
41