Alpha 6000 User Manual page 3

Preface
All rights reserved. The contents in this document are subject to change without notice.
If you have any questions and problems about the use of our products, please contact our
agents or us.
Any improved suggestions are welcome.
2
This system contains voltages that may be as high as 400 volts!
Electric shock can cause serious or fatal injury. Only qualified
personnel shall wire the drive.
Please cut off the power before wiring and inspecting. It is not
permissible to touch PCB or interior components before battery
control lamp goes off or until 5 minutes after the power has been
removed. It is necessary to use meters to confirm the charging
capacitance has discharged off. Otherwise, a risk of electric shock
may happen.
Don't contact AC power source to the output terminals U, V, W of
the inverter.
When using the inverter, the earthling terminal of the inverter must
be grounded correctly and reliably according to IEC536 Class 1,
NEC and other applicable standards.
Unauthorized change of inboard wiring and using accessories,
which sold or recommended by blame manufacturer may cause
fire, electric shock and injury.
Since body static electricity may cause serious damage to MOS
field-effect transistor and other sensitive elements, please don't
touch the interior devices, such as PCB, IGBT module etc. before
any measure taken to prevent static electricity.
Keep all marks and labels clear to read. Replace the lost or worn
mark at any moment.
Please keep the user manual near the inverter that can be reached
easily and give this manual to the users who use the product.
Danger!
Warning!
Caution!