Alpha 6000 User Manual page 162

is running or not. The parameters, which are marked "×" can be only changed when
the inverter is in stop state. Other parameters cannot be changed. About the
changeable of parameters, refer to Chapter 4 for details. In addition, you can
examine the parameters display on keyboard. If any digit of the parameter is
flashing, the parameter is allowed to change. If none digit of the parameter is
flashing, it cannot be changed.
 PF.01 is set to 1: only P0.00 and PF.01 can be changed;
 PF.01 is set to 2: only PF.01 can be changed.
 Tips:
If PF.01 is set to 0 (all parameters can be changed), reference frequency, speed PID
input, and analog PID digital input can be adjusted and saved online in parameters
monitoring state.
If PF.01 is set to 1, only reference frequency can be adjusted online.
If PF.01 is set to 2, All online adjusting are disabled.
PF.02 Parameter initialization
0: No operation
1: Clear fault history
2: Restore to defaults (except records and password).
Note:
 PF.02 is set to 0: No operation.
 PF.02 is set to 1: When PF.02 is set to 1, the fault records of PE.00~PE.08 will be
cleared in favor of faults debugging and analyzing.
 PF.02 is set to 2: If PF.02 is set to 2, the parameters (except running history and user
password) are restored to defaults.
 Tips:
If user forgets the setting value of parameters, and does not want to set them one by
one, setting PF.02 to 2 can be used to rapidly restored to defaults, in favor of
parameters resetting.
PF.02 will be restored to 0 automatically after clearing the fault records or restoring to
defaults. This means operation has already been finished.
PF.03 Parameter copy
0: No action
2: Parameters upload
Note:
 PF.03 is set to 0: No action;
 When PF.03 is set to 1 (Parameters download), the copied parameters stored in the
keyboard will be download to the inverter.
 If PF.03 is set to 2 (Parameters Upload), all parameters set by user in inverter will
be copied to EEPROM on keyboard.
Chapter 5 Parameter Introductions
Range: 0~2【0】
Range: 0~3【0】
1: Parameters download
3: Download parameters except motor's
161