Alpha 6000 User Manual page 148

the "Hz" unit indicator will flicker. If P0.01 is set to 1, which means the reference
frequency can be changed by keyboard digital encoder, turning left/right the digital
encoder will change the reference frequency. If keep on turning , the length of every
step can rise from 0.01 Hz to 0.1 Hz and the max 1 Hz. With this function, the
regulation can be quick. For details, please refer to P0.11 (step length of digital
encoder regulation).
PC.05 Rotate speed (r/min)
PC.06 Reference speed (r/min flashes)
0: No display
Note:
 If PC.05 is set to 1, rotate speed will be displayed in monitoring state, and the unit
indicator "r/min" (combination of unit "Hz" and" A") will be lit up. If it is set to 0,
rotate speed will not be displayed.
 If PC.06 is set to 1, reference speed will be displayed in monitoring state, and the
unit indicator "r/min" (combination of unit "Hz" and "A") will be lit up and
flickered.
 If PC.06 is set to 1, when the user press shift key >>
parameter or Rotate speed:
 In simple run mode: if P0.01 is set to 1, Reference speed can be adjusted online and
saved the reference frequency value into parameter P0.00 by pressing "ENTER"
key.
 In PID run mode: If P7.00 is set to 0 and P7.01 is set to 9 (PG or Single-phase
speed measuring input), PID reference (reference speed) can be adjusted online and
saved into parameter P7.03 by pressing "ENTER" key. If P7.01 is not set to 9, it
cannot be adjusted online.
PC.07 Linear speed (m/s)
PC.08 Reference linear speed (m/s flashes)
0: No display
Note:
 If PC.07 is set to 1, line speed will be displayed in monitoring state, and the unit
indicator "m/s" (combination of unit" A" and' V") will be lit up. If it is set to 0, line
speed will not be displayed.
 If PC.08 is set to 1, reference line speed will be displayed in monitoring state, and
the unit indicator "m/s" (combination of unit "A" and "V") will be lit up. The
reference line speed cannot be adjusted online.
PC.09 Output power (kW)
0: No display
Note:
Chapter 5 Parameter Introductions
Range: 0,1【0】
Range: 0,1【0】
1: Display
Range: 0,1【0】
Range: 0,1【0】
1: Display
Range: 0,1【0】
1: Display
to switch to monitor this
147