Page 1
SMILE5 2xCascading Wiring and Setting Procedure...
Page 2
Your Smart Energy Version Information Version Date Content Jun. 3, 2018 ___________________________________________________________________ Alpha ESS Co., Ltd. Page I of 5...
Page 3
Your Smart Energy Content Version Information ..................I Content ......................2 Wiring ......................3 Setting ......................4 ___________________________________________________________________ Alpha ESS Co., Ltd. Page 2 of 5...
Page 4
The corresponding DSP firmware version is V1.43 and its higher versions. 2. Backup Box cannot be used if you use the function of cascading. 3. The SMILE5 connected with L1 is the mater device, the other connected with L2 is the slave device.
Page 5
Step 8: Please choose “Mode” as “Parallel mode” and press enter. (master) and press enter Step 9: please repeat Step 1 to 8 to set the other device as L2 (slave) ___________________________________________________________________ Alpha ESS Co., Ltd. Page 4 of 5...
Need help?
Do you have a question about the SMILE5 and is the answer not in the manual?
Questions and answers