Highlight this option on the main menu and press <Enter>. The mes-
sage below will appear.
Load Setup Defaults (Y/N)? N
Type <Y> and press <Enter> to load the Setup default values.
PnP Configuration Setup
Use the arrow keys to highlight " PnP Configuration Setup" and press
<Enter>. A screen similar to the one below will appear.
The default setting of the Resources Controlled By option is " Manual" .
This will allow you to set the IRQ you have assigned your add-in card to
Legacy ISA or PCI/ISA PnP (Plug and Play). For non-PnP ISA cards,
select Legacy ISA. For PnP ISA or PCI cards, select PCI/ISA PnP.
If the Resources Controlled By option is set to " Auto" , the system will
automatically detect the settings for you. IRQ 3 - IRQ 15 and DMA 0 -
DMA 7 options will not be shown in the PnP Configuration Setup
screen.
I/O Configuration Setup
Use the arrow keys to highlight " I/O Configuration Setup" and press
<Enter>. A screen similar to the one on the next page will appear.
34