Ide Device Drivers - DFI G586IPC User Manual

OFFENDING ADDRESS NOT FOUND
This message is used in conjunction with the I/O CHANNEL CHECK
and RAM PARITY ERROR messages when the segment that has
caused the problem cannot be isolated.
OFFENDING SEGMENT
This message is used in conjunction with the I/O CHANNEL CHECK
and RAM PARITY ERROR messages when the segment that has
caused the problem has been isolated.
PRESS A KEY TO REBOOT
This will be displayed at the bottom screen when an error occurs that
requires a reboot. Press any key and the system will reboot.
PRESS F1 TO DISABLE NMI, F2 TO REBOOT
When BIOS detects a Non-Maskable Interrupt condition during boot,
this will allow NMI to be disabled and continue to boot. You can also
reboot the system with the NMI enabled.
SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT...
Indicates the present boot attempt has been aborted and the system
must be rebooted. Press and hold down the CTRL, ALT and DEL keys
simultaneously.

IDE Device Drivers

To install the IDE device drivers supported by the G586IPC system
board, please refer to the " Readme" file contained in the provided dis-
kette.
42