Cpu Installation; Jumper Settings For Cpu - DFI G586IPC User Manual

Note:
With the cache module installed in the cache module slot, the compo-
nents on the solder side of the add-in card in PCI Slot 4 must not pro-
trude more than 5mm. There is no limit to the length of the add-in card
installed in PCI Slot 4.

CPU Installation

The G586IPC allows for easy installation of CPUs. Make sure all jump-
ers are set correctly before applying power or you may damage the
CPU or system board. Please see the jumper settings below.

Jumper Settings for CPU

Jumpers JP6, JP7 and JP12
CPU Speed
Intel CPU Cyrix CPU
75MHz None
90MHz None
100MHz None
100MHz P120+
120MHz P150+
133MHz P166+
150MHz None
166MHz None
None P133+
16
JP7 JP7
JP6
Pins 1-2 Pins 3-4
Off O n O n
O n O n Off
O n Off O n
Off O n O n
O n O n Off
O n Off O n
O n O n Off
O n Off O n
O n Off Off
JP12 JP12
Pins 1-2 Pins 3-4
Off Off
Off Off
Off Off
O n Off
O n Off
O n Off
O n O n
O n O n
O n Off