DFI G586IPC User Manual page 11

2. Remove the system unit cover. Refer to the manufacturer' s instruc-
tions if necessary.
3. Remove expansion cards seated in any of the expansion slots and
detach all connectors from the old system board.
4. Loosen the screws holding the original system board and remove
the board from the system. Save the screws.
5. Remove the G586IPC from its original packing box. Be careful to
avoid touching all connectors and pins on the board. Please refer to
the handling instructions on pages 9-10 for proper handling tech-
niques.
6. Insert the SIMMs into the SIMM banks on the G586IPC. The quan-
tity and location of the SIMMs depends on the memory configura-
tion and type of modules you intend to use.
7. Insert the cache module, if any, into the cache module slot on the
G586IPC. Refer to the Cache Memory section on page 15 for up-
grading your cache memory.
8. Install the CPU. Be sure pin 1 of the CPU is aligned with pin 1 of
the socket.
9. Set the corresponding jumpers.
10. Install the prepared G586IPC system board into the case and re-
place the screws.
11.
Reinstall all cards and connectors and replace the system unit
cover. Reconnect all power cords and cables.
11