Pci Configuration Setup; Load Bios Defaults; Load Setup Defaults - DFI G586IPC User Manual

PCI Configuration Setup

Use the arrow keys to highlight " PCI Configuration Setup" and press
<Enter>; a screen similar to the one below will appear.
The PCI Configuration Setup allows you to assign INT A, B, C or D to
the hard drives installed in your system. Each INT may then be as-
signed an IRQ value.

Load BIOS Defaults

The " Load BIOS Defaults" option loads the troubleshooting default val-
ues permanently stored in the ROM chips. These settings are not opti-
mal and turn off all high performance features. You should use these
values only if you have hardware problems. Highlight this option on the
main menu and press <Enter>. The message below will appear.
Load BIOS Defaults (Y/N)? N
If you want to proceed, press <Y> and the default settings will be
loaded.

Load Setup Defaults

The " Load Setup Defaults" option loads optimized settings from the
BIOS ROM. Use the Setup default values as standard values for your
system.
33