Replacement Procedures
4.15 Speaker Module Assembly
Remove the Speaker Module Assembly
The following describes the procedure for removing a speaker module assembly. (See Figure
4-15-1 ~ Figure 4-15-3)
1. Disconnect the speaker cable on the system board side.
2. Release the following screws securing speaker module.
3. Remove the speaker module assembly.
Satellite L830 Maintenance Manual (960-Q08)
Figure 4-15-1 Disconnect the speaker cable
• M2.0×5.5-I (BZN)IRON Screw
M2.0×5.5 Screw
Figure 4-15-2 Release the screws
x4
45