System Board, Speaker And Mic, Ac In, Rj11/45, Mdc Cable; Removing The System Board, Speaker And Ac In, Rj11/45, Mdc Cable - Toshiba EQUIUM M40 Maintenance Manual

4.10 System Board, Speaker and AC-IN, RJ11/45, MDC cable 4 Replacement Procedures
4.10 System Board, Speaker and AC-IN, RJ11/45, MDC cable
Removing the System Board, Speaker and AC-IN, RJ11/45, MDC cable
NOTE: Be careful of the eject button for the PC card. It can be damage when removing
the board. Make sure it is pushed in.
Remove the System Board, Speaker and AC-IN, RJ11/45, MDC cable according to the
following procedures and Figures 4-30, 4-31 and 4-32.
1. Remove the L. speaker, R. speaker cable from CN2, CN3 on system board.
2. Remove the cable cover.
3. Remove two M2x4 black flat-head screws, and then remove the system board with
RJ11/45, AC-IN connector.
Figure 4-28 Removing the system board
5. Turn the system board upside down.
EQUIUM M40/M45 / Satellite M40/M45 Maintenance Manual 4-39